Rebel
Technician Helmets [Limited Supply]
Vacuum formed versions
of the Rebel Tech helmet, straight from the fan
film!
Here
is another fan film prop, the Rebel Tech helmet.
This is based on a mold taken from an actual WWII US Navy
Mark II 'Talker' helmet, and 2 custom made vac-form molds.
The communication box, and the chin cup. If you want to know
more, email me.
Based on the same molds as the RFT helmet. Now, for a limited
time, you can get one. By popular demand we made a few of
these Rebel Tech helmets kits from left over RFT kits.
These
helmet are available in kit form, only for now. We may have
a few finished Reb Tech helmets available soon.
International
order, shipping is extra. The shopping cart will calculate
the additional international freight charges when you check
out.
October 31, 2012
I am slowly getting my studio back into order and I am now taking orders. Please allow up to 3 weeks for order processing and delivery.
|
Replica Sterling L2A3 [E-11] Parts:
The original
plan for the fan film was to have 20 troopers in some large scale
battles, much like that of the old WWII movies. I started making
the blasters for the 20 troopers, then a production decision was
made to reduce the number of trooper by half. So, I am left with
a bunch of these resin parts, and if you need any let me know [email
me]. These were made to speed up the blaster making
for the fan film, and as a film prop, they do have minor air bubbles,
and flashing that need to be cleaned up. An easy job for the scratch-built
blaster project. These were cast from a real L2A3 Sterling, M38
scope, and counter box. [non-logo version]. Some parts are cast
in a gray resin as a test. These work great, and really help if
you plan to weather your parts.
|
Sterling
L2A3 Parts Kit
[SOLD
OUT]
6 piece resin versions of the hard to make blaster
parts
|
SOLD
OUT |
$48
plus shipping |
Below
are some pics of these parts being used to build a E-11 blaster
for use in the fan film.
|
|
|
Kit
pieces include the counter box, scope, grip, stock,
end cap, and barrel tip.Mounted
on a piece of PVC pipe, with other parts scratch built. |
painted
and detailed. |
|
If you need
individual parts, email me. Also, here you
will find more parts.
E-11barrel-tip SOLD
OUT |
Sterling
L2A3 Barrel Tip
[SOLD
OUT]
Here is the barrel-tip
for the E-11
This
is a solid resin cast. I did no make as many of these
parts, as I prefer to offer them as a kit. Some of
the parts will need to be cleaned up in order to
fit your PVC pipe. Some will have casting flaws/and
or air bubbles. See picture. A second run mold has
been made and castings are now available.
|
Note:
less than 20 made. |
$5
plus shipping |
M-38 Tank Scope for the E-11 SOLD
OUT |
M-38
Tank Scope
[SOLD
OUT]
Here is the proper scope for
the E-11
This
is a solid resin cast. I did no make as many of these
parts, as I prefer to offer them as a kit. Some of
the parts will need to be cleaned up in order to fit
your PVC pipe. Some will have casting flaws/and or
air bubbles. See picture. A second run mold has been
made and castings are now available.
|
Note:
less than 20 made. |
$16
plus shipping |
Counter Box for the E-11 SOLD
OUT |
Hengstler
Counter Box
[SOLD OUT]
Here is the non-logo version of the counter
box for the E-11.
This
is a solid resin cast. I did no make
as many of these parts, as I prefer
to offer them as a kit. Some of the
parts will need to be cleaned up
in order to fit your PVC pipe. Some
will have casting flaws/and or air
bubbles. See picture. A second run
mold has been made and new castings
will be available soon.
|
Note:
less than 20 made. |
$12
plus shipping |
E-11or Dh-17 Solid Grip SOLD
OUT |
L2A3
Sterling Grip
[SOLD OUT]
Here is the basic grip for the E-11 or DH-17.
This
is a resin cast, just liike the original.
I did not make as many of these parts,
as I prefer to offer them as a kit.
Some of the parts will need to be
cleaned up in order to fit your PVC
pipe. Some will have casting flaws
and/or air bubbles. See picture.
|
Note:
less than 20 made. |
$14
plus shipping |
Solid resin stock assembly for the
E-11. SOLD
OUT |
L2A3
Sterling Solid 'folding' Stock [SOLD
OUT]
Here is the stock assembly
for the E-11
This
is a solid resin cast. I did no make
as many of these parts, as I prefer
to offer them as a kit. Some of the
parts will need to be cleaned up
in order to fit your PVC pipe. Some
will have casting flaws/and or air
bubbles. See picture. A second run
mold has been made and castings are
now available.
|
Note:
less than 20 made. |
$12
plus shipping |
Trooper Knee Power Pack |
Knee
Power Pack
We have a few extras left over.
These are straight from the fan film. Here
is the knee power pack, that accent part of the
right knee. Now, I have a few to spare. $10 each,
plus $5 shipping. When these are gone, there
will be no more! Made of .080 white High Impact
Polystyrene, [HIPs].
|
*Note:
Only 10 available |
$12
plus shipping. |
I have a few other
trooper parts. email me
for details.
|